Lexmark CX825 Service Manual page 315

Action
Step 11
Reinstall or replace the belt. See
removal" on page 969.
Does the problem remain?
Step 12
Check the pulley gears for misalignment and damage.
Are the pulley gears properly installed and free of damage?
Step 13
Reinstall or replace the pulley gear.
Does the problem remain?
Step 14
a
Enter the Diagnostics menu, and then navigate to:
Output device diagnostics > Motor tests > Finisher > Mid-
transport
b
Touch Start.
Does the motor run?
Step 15
Reseat the motor cable, and then check the motor for misalignment
and damage.
Is the motor properly installed and free of damage?
Step 16
Reinstall or replace the motor. See
removal" on page 1001.
Does the problem remain?
Step 17
Check the staging transport gear for misalignment and damage.
Is the gear properly installed and free of damage?
Step 18
Reinstall or replace the gear. See
removal" on page 986.
Does the problem remain?
"Staging outer transport belt
"Motor (mid-transport)
"Staging transport gears
Diagnostic information
315
Yes No
Go to step 12. The problem is
solved.
Go to step 14. Go to step 13.
Go to step 14. The problem is
solved.
Go to step 17. Go to step 15.
Go to step 17. Go to step 16.
Go to step 17. The problem is
solved.
Go to step 19. Go to step 18.
Go to step 19. The problem is
solved.
7564