Lexmark CX825 Service Manual page 301

Action
Step 5
a
Enter the Diagnostics menu, and then navigate to:
Output device diagnostics > Motor tests > Finisher > Diverter,
standard bin position
b
Touch Start.
Does the motor run?
Step 6
Reseat the motor cable, and then check the motor for misalignment
and damage.
Is the motor properly installed and free of damage?
Step 7
Reinstall or replace the motor. See
removal" on page 1032.
Does the problem remain?
Step 8
a
Enter the Diagnostics menu, and then navigate to:
Output device diagnostics > Motor tests > Finisher > Mid-
transport
b
Touch Start.
Does the motor run?
Step 9
Reseat the motor cable, and then check the motor for misalignment
and damage.
Is the motor properly installed and free of damage?
Step 10
Reinstall or replace the motor. See
removal" on page 1001.
Does the problem remain?
Step 11
Check the mid-transport gear for misalignment and damage.
Is the gear properly installed and free of damage?
Step 12
Reinstall or replace the gear. See
on page 1003.
Does the problem remain?
"Motor (mid-transport diverter)
"Motor (mid-transport)
"Mid-transport gear removal"
Diagnostic information
301
Yes No
Go to step 8. Go to step 6.
Go to step 8. Go to step 7.
Go to step 8. The problem is
solved.
Go to step 11. Go to step 9.
Go to step 11. Go to step 10.
Go to step 11. The problem is
solved.
Go to step 13. Go to step 12.
Go to step 13. The problem is
solved.
7564