Cartridge Or Photoconductor Error Service Check - Lexmark CX825 Service Manual

Error code Description
55 The internal option installed is unsupported.
56 The parallel port, serial port, or standard USB
port is disabled.
58 The disks, trays, or bins installed are too many.
58 An output configuration error was detected at
the MSHPF.
59 The input option or output option is incompatible. See
61 The hard disk is defective.
62 The hard disk is full.
80 The printer requires maintenance. The
appropriate maintenance kit needs to be
installed.
84 A photoconductor unit end of life error was
detected:
•
The photoconductor unit life is low, nearly
low, or very low.
•
The photoconductor unit needs to be
replaced.
85 A developer unit end of life error was detected:
•
The developer unit life is low, nearly low, or
very low.
•
The developer unit needs to be replaced.
88 A toner cartridge end of life error was detected:
•
The toner cartridge supply is low, nearly low,
or very low.
•
The toner cartridge needs to be replaced.

Cartridge or photoconductor error service check

Action
Step 1
a
Make sure that the cartridge or photoconductor unit is installed.
b
Check if the cartridge or photoconductor unit is supported, and
replace if necessary.
Does the problem remain?
Action
See "Unsupported internal option service
check" on page
See "Disabled port service check" on
page 397.
See "Excess options service check" on
page 398.
See "MSHPF configuration error service
check" on page
"Incompatible hardware option service
check" on page
See "Hard disk failure service check" on
page 403.
See "Maintenance kit service check" on
page 403.
See "Cartridge or photoconductor error service
check" on page
See "Cartridge or photoconductor error service
check" on page
See "Cartridge or photoconductor error service
check" on page
Diagnostic information
389
396.
398.
402.
389.
389.
389.
Yes No
Go to step 2. The problem is
solved.
7564