Disabled Port Service Check - Lexmark CX825 Service Manual

Action
Step 3
Make sure that the firmware version is the latest, and update if
necessary.
Does the problem remain?

Disabled port service check

Action
Step 1
a
Make sure that the cables connected to ports are properly
installed.
b
Check the cables for damage, and replace if necessary.
Does the problem remain?
Step 2
From the home screen, touch Settings > Network/Ports, and then
make sure that the applicable port settings are enabled.
Does the problem remain?
Step 3
If applicable, make sure that the option card is supported.
Does the problem remain?
Step 4
Check the controller board pins for damage, and replace if
necessary. See "Controller board removal" on page
Does the problem remain?
Step 5
Make sure that the firmware version is the latest, and update if
necessary.
Does the problem remain?
677.
Diagnostic information
397
Yes No
Contact the next The problem is
level of support. solved.
Yes No
Go to step 2. The problem is
solved.
Go to step 3. The problem is
solved.
Go to step 4. The problem is
solved.
Go to step 5. The problem is
solved.
Contact the next The problem is
level of support. solved.
7564