Lexmark CX825 Service Manual page 268

Action
Step 6
a
Enter the Diagnostics menu, and then navigate to:
Output device diagnostics > Sensor tests > Mailbox
b
Find the sensor (Diverter).
Does the sensor status change while toggling the sensor?
Step 7
Reseat the sensor cable, and then check the sensor for
misalignment and damage.
Is the sensor properly installed and free of damage?
Step 8
Reinstall or replace the sensor. See
home) removal" on page
Does the problem remain?
Step 9
a
Enter the Diagnostics menu, and then navigate to:
Output device diagnostics > Motor tests > Mailbox > Mailbox
position diverter
b
Touch Start.
Does the motor run?
Step 10
Reseat the motor cable, and then check the motor for misalignment
and damage.
Is the motor properly installed and free of damage?
Step 11
Reinstall or replace the motor. See
removal" on page 1205.
Does the problem remain?
Step 12
Check the mailbox diverter gear for misalignment and damage.
Is the gear properly installed and free of damage?
Step 13
Reinstall or replace the mailbox diverter gear. See
diverter gear removal" on page
Does the problem remain?
"Sensor (mailbox diverter
1215.
"Motor (mailbox diverter)
"Mailbox
1217.
Diagnostic information
268
Yes No
Go to step 9. Go to step 7.
Go to step 9. Go to step 8.
Go to step 9. The problem is
solved.
Go to step 12. Go to step 10.
Go to step 12. Go to step 11.
Go to step 12. The problem is
solved.
Go to step 14. Go to step 13.
Go to step 14. The problem is
solved.
7564