Lexmark CX825 Service Manual page 156

Action
Step 5
Replace the sensor (deskew roller exit).
Does the problem remain?
Step 6
Perform a print job.
Does the problem remain?
Sensor (deskew roller exit): Paper failed to clear service check
Action
Step 1
Check the paper path for paper jams and fragments.
Is the paper path free of jams and fragments?
Step 2
Remove the paper jams and fragments.
Does the problem remain?
Step 3
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Sensor tests
b
Find the sensor (Deskew roller exit).
Does the sensor status change while toggling the sensor?
Step 4
Check the sensor cable for proper connection, and then reseat if
necessary.
Does the problem remain?
Step 5
Replace the sensor.
Does the problem remain?
Step 6
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Motor tests > Transfer
belt
b
Touch Start.
Does the motor run?
Diagnostic information
156
Yes No
Go to step 6. The problem is
solved.
Contact the next The problem is
level of support. solved.
Yes No
Go to step 3. Go to step 2.
Go to step 3. The problem is
solved.
Go to step 6. Go to step 4.
Go to step 5. The problem is
solved.
Go to step 6. The problem is
solved.
Go to step 9. Go to step 7.
7564