Toner Add Motor Gearbox (K, C, And M) Removal - Lexmark CX825 Service Manual

•
Bottom and right side

Toner add motor gearbox (K, C, and M) removal

1
Remove the controller board cover. See
2
Remove the rear lower cover. See
3
Remove the rear upper cover. See
4
Remove the left upper cover. See
5
Remove the rear left cover. See
6
Remove the controller board cage. See
7
Cut the cable tie (A), and then disconnect the cable from the appropriate motor (B).
"Controller board cover removal" on page
"Rear lower cover removal" on page
"Rear upper cover removal" on page
"Left upper cover removal" on page
"Rear left cover removal" on page
"Controller board cage removal" on page
Repair information
686
671.
672.
672.
605.
673.
684.
7564