Lexmark CX825 Service Manual page 217

Action
Step 7
a
Enter the Diagnostics menu, and then navigate to:
Additional input tray diagnostics > Motor tests > Pick (tray 3)
b
Touch Start.
Does the motor run?
Step 8
Check the motor cable for proper connection, and then reseat if
necessary.
Does the problem remain?
Step 9
Replace the motor.
Does the problem remain?
Step 10
Perform a print job.
Does the problem remain?
Sensor (tray 3 pass‑through) static jam service check
Action
Step 1
Check the paper path for paper jams and fragments.
Is the paper path free of jams and fragments?
Step 2
Remove the paper jams and fragments.
Does the problem remain?
Step 3
a
Enter the Diagnostics menu, and then navigate to:
Additional input tray diagnostics > Sensor tests
b
Find the sensor (Pass-through (tray 3)).
Does the sensor status change while toggling the sensor?
Step 4
Check the sensor cable for proper connection, and then reseat if
necessary.
Does the problem remain?
Diagnostic information
217
Yes No
Go to step 10. Go to step 8.
Go to step 9. The problem is
solved.
Go to step 10. The problem is
solved.
Contact the next The problem is
level of support. solved.
Yes No
Go to step 3. Go to step 2.
Go to step 3. The problem is
solved.
Go to step 6. Go to step 4.
Go to step 5. The problem is
solved.
7564