Hpt Autoconnect Cable Removal - Lexmark CX825 Service Manual

8
Cut the cable tie (F), and then remove the cables.
Installation note: Route the cables through the clamps (A), and then secure the cables with cable ties (B)
to avoid contact between the cables and the belts (C).
9
Remove the HPT lock.

HPT autoconnect cable removal

1
Remove the rear cover. See
2
Remove the controller board. See
F
C
"HPT rear cover removal" on page
"HPT controller board removal" on page
Repair information
A
B
C
869.
891
870.
7564