Lexmark CX825 Service Manual page 141

Action
Step 15
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Motor tests > Transfer
belt
b
Touch Start.
Does the motor run?
Step 16
Check the motor cable for proper connection, and then reseat if
necessary.
Does the problem remain?
Step 17
Replace the motor.
Does the problem remain?
Step 18
Perform a print job.
Does the problem remain?
Sensor (fuser exit): Paper cleared too early service check
Action
Step 1
Check the fuser rollers for damage.
Are the rollers free of damage?
Step 2
Replace the fuser. See
Does the problem remain?
Step 3
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Sensor tests
b
Find the sensor (Fuser exit).
Does the sensor status change while toggling the sensor?
Step 4
Check the sensor cable for proper connection, and then reseat if
necessary.
Does the problem remain?
"Fuser removal" on page
Diagnostic information
Yes
Go to step 18.
Go to step 17.
Go to step 18.
Contact the next
level of support.
Yes
Go to step 3.
Go to step 3.
606.
Go to step 6.
Go to step 5.
141
7564
No
Go to step 16.
The problem is
solved.
The problem is
solved.
The problem is
solved.
No
Go to step 2.
The problem is
solved.
Go to step 4.
The problem is
solved.