Staple Finisher Bin Clamp Assembly Removal - Lexmark CX825 Service Manual

Staple finisher bin clamp assembly removal
1
Remove the front cover. See
2
Remove the rear cover. See
3
Remove the controller board. See
4
Remove the inner rear cover. See
5
Remove the bottom cover. See
6
Set aside the locking assembly.
7
Remove the sensor (staple finisher bin clamp). See
page 853.
8
Remove the clip (A) and the the bushing.
"Staple finisher front cover removal" on page
"Staple finisher rear cover removal" on page
"Staple finisher controller board removal" on page
"Staple finisher inner rear cover removal" on page
"Staple finisher bottom cover removal" on page
"Sensor (staple finisher bin clamp) removal" on
Repair information
846
787.
788.
A
7564
790.
795.
794.