Excess Options Service Check - Lexmark CX825 Service Manual

Excess options service check

Action
Step 1
Reset the printer, and then resend the print job.
Does the problem remain?
Step 2
If applicable, make sure that the internal option is supported.
Does the problem remain?
Step 3
a
If applicable, remove all internal options.
b
Reset the printer, and then resend the print job.
Does the problem remain?
Step 4
Check if the number of internal options installed is allowed, and
remove the excess option.
Does the problem remain?
Step 5
Check if the number of input options installed is allowed, and
remove the excess option.
Does the problem remain?
Step 6
Check the controller board pins for damage, and replace if
necessary. See "Controller board removal" on page
Does the problem remain?
MSHPF configuration error service check
Action
Step 1
a
Check the MSHPF for proper installation, and then check its
paper path. See "Procedure before starting the MSHPF
service checks" on page
b
Enter the Diagnostics menu, select Output bin quick feed >
select bin, and then touch Single or Continuous.
Does the problem remain?
677.
256.
Diagnostic information
398
Yes No
Go to step 2. The problem is
solved.
Go to step 3. The problem is
solved.
Go to step 6. Go to step 4.
Go to step 5. The problem is
solved.
Go to step 6. The problem is
solved.
Contact the next The problem is
level of support. solved.
Yes No
Go to step 2. The problem is
solved.
7564