Lexmark CX825 Service Manual page 329

Compiler tray jam service check
Action
Step 1
a
Check the MSHPF for proper installation, and then check its
paper path. See "Procedure before starting the MSHPF
service checks" on page
b
Enter the Diagnostics menu, select Output bin quick feed >
select bin, and then touch Single or Continuous.
Does the problem remain?
Step 2
a
Enter the Diagnostics menu, and then navigate to:
Output device diagnostics > Sensor tests > Finisher
b
Find the sensor (Compiler paper present).
Does the sensor status change while toggling the sensor?
Step 3
Reseat the sensor cable, and then check the sensor for
misalignment and damage.
Is the sensor properly installed and free of damage?
Step 4
Reinstall or replace the sensor. See
present) removal" on page
Does the problem remain?
Step 5
Check the compiler exit rollers for contamination, wear, and
damage.
Are the rollers free of damage?
Step 6
Check the rollers for misalignment.
Are the rollers properly installed?
Step 7
Reinstall or replace the roller. See
on page 1142.
Does the problem remain?
256.
"Sensor (compiler paper
1156.
"Compiler exit roller removal"
Diagnostic information
329
Yes No
Go to step 2. The problem is
solved.
Go to step 5. Go to step 3.
Go to step 5. Go to step 4.
Go to step 5. The problem is
solved.
Go to step 6. Go to step 7.
Go to step 8. Go to step 7.
Go to step 8. The problem is
solved.
7564