3
Turn the skew adjustment screw (B) clockwise for negative skew or counterclockwise for positive skew.
Note: Each full turn of the adjustment screw yields 0.6 mm of skew correction. The maximum adjustment
is one full turn either way.
4
After the skew has been corrected, tighten the two screws, and then reinstall the ADF front cover.
ADF skew adjustment (deskew roller)
1
Remove the ADF front cover. See
2
Loosen the two screws (A) securing the adjusting bracket to the ADF frame.
B
"ADF front cover removal" on page
Repair information
595
A
713.
7564