Y Paper Jams - Lexmark CX825 Service Manual

48y paper jams

480–484 paper jam messages
Error Description
code
480.23 The staple unit head did not reach its
home position.
480.25 The staple unit head never cleared its
home position.
484.23 The staple unit carriage did not reach the
sensor (MSHPF staple unit carriage
position).
484.25 The staple unit carriage never cleared the
sensor (MSHPF staple unit carriage
position).
486.29 Engine page error was detected.
Staple carriage jam service check
Action
Step 1
a
Check the MSHPF for proper installation, and then check its
paper path. See "Procedure before starting the MSHPF
service checks" on page
b
Enter the Diagnostics menu, select Output bin quick feed >
select bin, and then touch Single or Continuous.
Does the problem remain?
Step 2
Check the MSHPF staple cartridge door for misalignment and
damage.
Note: When closing the door, its actuator should properly
engage with the door sensor and switch.
Is the door properly installed and free of damage?
Step 3
Reinstall or replace the door. See
removal" on page 919.
Does the problem remain?
Action
See
See
256.
"MSHPF staple cartridge door
Diagnostic information
376
"Staple carriage jam service check" on page
"MSHPF engine error service check" on page
Yes
Go to step 2.
Go to step 4.
Go to step 4.
7564
376.
382.
No
The problem is
solved.
Go to step 3.
The problem is
solved.