Lexmark CX825 Service Manual page 511

Action
Step 21
Reinstall or replace the belt. See
removal" on page 1144.
Does the problem remain?
Step 22
Check the stapler bin lower exit roller for contamination, wear, and
damage.
Is the roller free of damage?
Step 23
Check the roller for misalignment.
Is the roller properly installed?
Step 24
Reinstall or replace the roller. See
removal" on page 1158.
Does the problem remain?
Step 25
Check the compiler interface board cables.
•
Reseat all connectors on the interface board.
•
Make sure that the cables are properly routed.
Does the problem remain?
Step 26
Replace the interface board. See
removal" on page 1132.
Does the problem remain?
Step 27
Check the interface board cables for cuts and damage.
Are the cables free of damage?
Step 28
Replace the cable.
Does the problem remain?
"Stapler bin lower exit roller belt
"Stapler bin lower exit roller
"Compiler interface board
Diagnostic information
511
Yes No
Go to step 22. The problem is
solved.
Go to step 23. Go to step 24.
Go to step 25. Go to step 24.
Go to step 25. The problem is
solved.
Go to step 26. The problem is
solved.
Go to step 27. The problem is
solved.
Go to step 29. Go to step 28.
Go to step 29. The problem is
solved.
7564