Lexmark CX825 Service Manual page 186

Action
Step 18
Replace the sensor.
Does the problem remain?
Step 19
a
Enter the Diagnostics menu, and then navigate to:
Additional input tray diagnostics > Motor tests > Pass-
through (tray 2)
b
Touch Start.
Does the motor run?
Step 20
Check the motor cable for proper connection, and then reseat if
necessary.
Does the problem remain?
Step 21
Replace the motor. See "Motor (550-sheet tray pass‑through)
removal" on page 762.
Does the problem remain?
Step 22
a
Enter the Diagnostics menu, and then navigate to:
Additional input tray diagnostics > Motor tests > Pass-
through (tray 3)
b
Touch Start.
Does the motor run?
Step 23
Check the motor cable for proper connection, and then reseat if
necessary.
Does the problem remain?
Step 24
Replace the motor. See "Motor (550-sheet tray pass‑through)
removal" on page 762.
Does the problem remain?
Diagnostic information
186
Yes No
Go to step 19. The problem is
solved.
Go to step 22. Go to step 20.
Go to step 21. The problem is
solved.
Go to step 22. The problem is
solved.
Go to step 25. Go to step 23.
Go to step 24. The problem is
solved.
Go to step 25. The problem is
solved.
7564