Lexmark CX825 Service Manual page 241

Action
Step 6
Clean or replace the pick roller. See
page 710.
Does the problem remain?
Step 7
Check the condition of the ADF feed belt.
Is the feed belt free from excess wear, contamination, and
damage?
Step 8
Clean or replace the feed belt. See
page 710.
Does the problem remain?
Step 9
Check the condition of the ADF separator roller.
Is the separator roller free from excess wear, contamination, and
damage?
Step 10
Clean or replace the separator roller. See
removal" on page 726.
Does the problem remain?
Step 11
a
Enter the Diagnostics menu, and then navigate to:
Scanner diagnostics > Sensor tests
b
Find the sensor (ADF media exit).
Does the sensor status change while toggling the sensor?
Step 12
Check the sensor cable for proper connection, and then reseat if
necessary.
Does the problem remain?
Step 13
Replace the sensor.
Does the problem remain?
"ADF pick roller removal" on
"ADF feed belt removal" on
"ADF separator roller
Diagnostic information
241
Yes No
Go to step 7. The problem is
solved.
Go to step 9. Go to step 8.
Go to step 9. The problem is
solved.
Go to step 11. Go to step 10.
Go to step 11. The problem is
solved.
Go to step 14. Go to step 12.
Go to step 13. The problem is
solved.
Go to step 14. The problem is
solved.
7564