Lexmark CX825 Service Manual page 428

Action
Step 6
Check the motor (black only retract) cable for damage.
Is the cable free of damage?
Step 7
Replace the cable.
Does the problem remain?
Step 8
Reset the printer.
Does the problem remain?
Step 9
Replace the motor (black only retract).
Does the problem remain?
Step 10
Reset the printer.
Does the problem remain?
Step 11
Replace the controller board. See
page 677.
Does the problem remain?
Motor (deskew) failure service check
Action
Step 1
Reset the printer.
Does the problem remain?
Step 2
Check the controller board socket JMTR2 connection.
Is the cable properly connected?
Step 3
Reseat the cable.
Does the problem remain?
"Controller board removal" on
Diagnostic information
428
Yes No
Go to step 8. Go to step 7.
Go to step 8. The problem is
solved.
Go to step 9. The problem is
solved.
Go to step 10. The problem is
solved.
Go to step 11. The problem is
solved.
Contact the next The problem is
level of support. solved.
Yes No
Go to step 2. The problem is
solved.
Go to step 4. Go to step 3.
Go to step 4. The problem is
solved.
7564