Lexmark CX825 Service Manual page 190

Action
Step 10
Clean the paper path.
Does the problem remain?
Step 11
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Sensor tests
b
Find the sensor (MPF/pass-through).
Does the sensor status change while toggling the sensor?
Step 12
Check the sensor cable for proper connection, and then reseat if
necessary.
Does the problem remain?
Step 13
Replace the sensor. See "Sensor (MPF/pass-through) with
deflector removal" on page
Does the problem remain?
Step 14
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Motor tests > MPF pick
b
Touch Start.
Does the motor run?
Step 15
Check the motor cable for proper connection, and then reseat if
necessary.
Does the problem remain?
Step 16
Replace the motor.
Does the problem remain?
Step 17
Perform a print job.
Does the problem remain?
622.
Diagnostic information
190
Yes No
Go to step 11. The problem is
solved.
Go to step 14. Go to step 12.
Go to step 13. The problem is
solved.
Go to step 14. The problem is
solved.
Go to step 17. Go to step 15.
Go to step 16. The problem is
solved.
Go to step 17. The problem is
solved.
Contact the next The problem is
level of support. solved.
7564