Lexmark CX825 Service Manual page 381

Action
Step 36
Check the carriage cables for cuts and damage.
Are the cables free of damage?
Step 37
Replace the cable. See "Staple unit extension cable removal" on
page 958 and "Staple unit cable removal" on page
Does the problem remain?
Step 38
Check the compiler interface board cables.
•
Reseat all connectors on the interface board.
•
Make sure that the cables are properly routed.
Does the problem remain?
Step 39
Replace the interface board. See
removal" on page 1132.
Does the problem remain?
Step 40
Check the interface board cables for cuts and damage.
Are the cables free of damage?
Step 41
Replace the cable.
Does the problem remain?
Step 42
a
Reseat all connectors on the MSHPF controller board.
b
Make sure that the cables are properly routed, and then reset
the printer.
Does the problem remain?
Step 43
Replace the MSHPF controller board. See
board removal" on page
Does the problem remain?
"Compiler interface board
"MSHPF controller
937.
Diagnostic information
Yes
Go to step 38.
Go to step 38.
1169.
Go to step 39.
Go to step 40.
Go to step 42.
Go to step 42.
Go to step 43.
Contact the next
level of support.
381
7564
No
Go to step 37.
The problem is
solved.
The problem is
solved.
The problem is
solved.
Go to step 41.
The problem is
solved.
The problem is
solved.
The problem is
solved.