Lexmark CX825 Service Manual page 523

Action
Step 12
Check the gears and the flag for damage.
Are the gears and the flag free of damage?
Step 13
Replace the gears. See "Staple finisher aligner paddle gears
removal" on page 814.
Does the problem remain?
Step 14
Check the exit roller belts for proper installation and damage.
Are the belts properly installed or free of damage?
Step 15
Reinstall or replace the belts. See
removal" on page 821.
Does the problem remain?
Step 16
Check the exit gears for proper alignment and installation.
Are the gears properly aligned or installed?
Step 17
Realign or reinstall the exit gears.
Does the problem remain?
Step 18
Check the exit gears for damage.
Are the gears free of damage?
Step 19
Replace the gears. See "Staple finisher exit gears removal" on
page 817.
Does the problem remain?
Step 20
Check the cables for cuts or damage, and replace if necessary.
Does the problem remain?
"Staple finisher exit roller belts
Diagnostic information
523
Yes No
Go to step 14. Go to step 13.
Go to step 14. The problem is
solved.
Go to step 16. Go to step 15.
Go to step 16. The problem is
solved.
Go to step 18. Go to step 17.
Go to step 18. The problem is
solved.
Go to step 20. Go to step 19.
Go to step 20. The problem is
solved.
Go to step 21. The problem is
solved.
7564