Lexmark CX825 Service Manual page 304

Action
Step 3
Reinstall or replace the door. See
1056.
Does the problem remain?
Step 4
a
Enter the Diagnostics menu, and then navigate to:
Output device diagnostics > Sensor tests > Finisher
b
Find the sensor (Standard bin exit).
Does the sensor status change while toggling the sensor?
Step 5
Reseat the sensor cable, and then check the sensor and its
actuator for misalignment and damage.
Is the sensor properly installed and free of damage?
Step 6
Reinstall or replace the sensor. See
exit) removal" on page 1061.
Does the problem remain?
Step 7
Check the MSHPF standard bin bail for misalignment and damage.
Is the bin bail properly installed and free of damage?
Step 8
Reinstall or replace the standard bin bail.
Does the problem remain?
Step 9
Check the MSHPF standard bin exit belt for misalignment and
damage.
Note: Make sure that there are no other parts interfering with the
movement of the belt.
Is the belt properly installed and free of damage?
Step 10
Reinstall or replace the belt. See
removal" on page 996.
Does the problem remain?
"Door J1 removal" on page
"Sensor (MSHPF standard bin
"MSHPF standard bin exit belt
Diagnostic information
304
Yes No
Go to step 4. The problem is
solved.
Go to step 7. Go to step 5.
Go to step 7. Go to step 6.
Go to step 7. The problem is
solved.
Go to step 9. Go to step 8.
Go to step 9. The problem is
solved.
Go to step 11. Go to step 10.
Go to step 11. The problem is
solved.
7564