Lexmark CX825 Service Manual page 352

Action
Step 8
Check the compiler stack height clamp for proper installation.
•
Check all of the components for misalignment.
•
Reseat the cables.
•
Make sure that the cables are properly routed.
Is the stack height clamp properly installed?
Step 9
Check the stack height clamp for damage.
Is the stack height clamp free of damage?
Step 10
Reinstall or replace the stack height clamp. See
assembly removal" on page
Does the problem remain?
Step 11
Check the compiler interface board cables.
•
Reseat all connectors on the interface board.
•
Make sure that the cables are properly routed.
Does the problem remain?
Step 12
Replace the interface board. See
removal" on page 1132.
Does the problem remain?
Step 13
Check the interface board cables for cuts and damage.
Are the cables free of damage?
Step 14
Replace the cable.
Does the problem remain?
Step 15
a
Reseat all connectors on the MSHPF controller board.
b
Make sure that the cables are properly routed, and then reset
the printer.
Does the problem remain?
"Stack height
1135.
"Compiler interface board
Diagnostic information
352
Yes No
Go to step 9. Go to step 10.
Go to step 11. Go to step 10.
Go to step 11. The problem is
solved.
Go to step 12. The problem is
solved.
Go to step 13. The problem is
solved.
Go to step 15. Go to step 14.
Go to step 15. The problem is
solved.
Go to step 16. The problem is
solved.
7564