Motor (Staple Finisher Aligner Paddle) Removal - Lexmark CX825 Service Manual

Motor (staple finisher aligner paddle) removal
1
Remove the front cover. See
2
Set aside the cables, and then remove the four screws (A).
3
Remove the motor from the bracket.
Staple finisher transport gears removal
1
Remove the front cover. See
2
Disconnect the three cables (A), and then remove the four screws (B).
"Staple finisher front cover removal" on page
A
"Staple finisher front cover removal" on page
Repair information
812
787.
787.
A
7564