Y Errors - Lexmark CX825 Service Manual

Action
Step 13
Replace the EP/developer/toner add gearbox. See
toner add gearbox removal" on page
Does the problem remain?
Step 14
Reset the printer.
Does the problem remain?
Step 15
Replace the controller board. See
page 677.
Does the problem remain?

14y errors

141–149 error messages
Error code Description
141.80 The motor (K photoconductor) did not turn on.
141.81 The motor (K photoconductor) did not turn off.
141.82 The motor (K photoconductor) speed did not ramp
up to the required level.
141.83 The motor (K photoconductor) stalled.
141.84 The motor (K photoconductor) ran too slow.
141.85 The motor (K photoconductor) ran too fast.
142.80 The motor (CMY photoconductors) did not turn on. See
142.81 The motor (CMY photoconductors) did not turn off.
142.82 The motor (CMY photoconductors) speed did not
ramp up to the required level.
142.83 The motor (CMY photoconductors) stalled.
142.84 The motor (CMY photoconductors) ran too slow.
142.85 The motor (CMY photoconductors) ran too fast.
"EP, developer,
689.
"Controller board removal" on
Diagnostic information
422
Yes
Go to step 14.
Go to step 15.
Contact the next
level of support.
Action
See "Motor (K photoconductor) failure service
check" on page 424.
"Motor (CMY photoconductors) failure
service check" on page 425.
7564
No
The problem is
solved.
The problem is
solved.
The problem is
solved.