Lexmark CX825 Service Manual page 506

Action
Step 2
a
Enter the Diagnostics menu, and then navigate to:
Output device diagnostics > Motor tests > Finisher > Staging,
outer and inner transport
b
Touch Start.
Does the motor run?
Step 3
Reseat the motor cable, and then check the motor for misalignment
and damage.
Is the motor properly installed and free of damage?
Step 4
Reinstall or replace the motor. See
transport) removal" on page
Does the problem remain?
Step 5
Check the staging transport belts for misalignment and damage.
Note: Make sure that there are no other parts interfering with the
movement of the belts.
Are the belts properly installed and free of damage?
Step 6
Reinstall or replace the belt. See
removal" on page 990.
Does the problem remain?
Step 7
Check the staging transport gears for misalignment and damage.
Are the gears properly installed and free of damage?
Step 8
Reinstall or replace the gear. See
removal" on page 986.
Does the problem remain?
Step 9
Check the pulley gears for misalignment and damage.
Are the pulley gears properly installed and free of damage?
"Motor (staging inner
982.
"Staging transport belts
"Staging transport gears
Diagnostic information
506
Yes No
Go to step 5. Go to step 3.
Go to step 5. Go to step 4.
Go to step 5. The problem is
solved.
Go to step 7. Go to step 6.
Go to step 7. The problem is
solved.
Go to step 9. Go to step 8.
Go to step 9. The problem is
solved.
Go to step 11. Go to step 10.
7564