Lexmark CX825 Service Manual page 364

Action
Step 16
Check the mid-transport interface board cables.
•
Reseat all connectors on the interface board.
•
Make sure that the cables are properly routed.
Does the problem remain?
Step 17
Replace the interface board. See
removal" on page 1005.
Does the problem remain?
Step 18
Check the interface board cables for cuts and damage.
Are the cables free of damage?
Step 19
Replace the cable.
Does the problem remain?
Step 20
a
Reseat all connectors on the MSHPF controller board.
b
Make sure that the cables are properly routed, and then reset
the printer.
Does the problem remain?
Step 21
Replace the MSHPF controller board. See
board removal" on page
Does the problem remain?
Staging diverter jam service check
Action
Step 1
a
Check the MSHPF for proper installation, and then check its
paper path. See "Procedure before starting the MSHPF
service checks" on page
b
Enter the Diagnostics menu, select Output bin quick feed >
select bin, and then touch Single or Continuous.
Does the problem remain?
"Mid-transport interface board
"MSHPF controller
937.
256.
Diagnostic information
Yes
Go to step 17.
Go to step 18.
Go to step 20.
Go to step 20.
Go to step 21.
Contact the next
level of support.
Yes
Go to step 2.
364
7564
No
The problem is
solved.
The problem is
solved.
Go to step 19.
The problem is
solved.
The problem is
solved.
The problem is
solved.
No
The problem is
solved.