Lexmark CX825 Service Manual page 303

Action
Step 22
Reinstall or replace diverter 2. See
removal" on page 1058.
Does the problem remain?
Step 23
Check the mid‑transport interface board cables.
•
Reseat all connectors on the interface board.
•
Make sure that the cables are properly routed.
Does the problem remain?
Step 24
Replace the interface board. See
removal" on page 1005.
Does the problem remain?
Step 25
a
Reseat all connectors on the MSHPF controller board.
b
Make sure that the cables are properly routed, and then reset
the printer.
Does the problem remain?
Step 26
Replace the MSHPF controller board. See
board removal" on page
Does the problem remain?
MSHPF standard bin exit jam service check
Action
Step 1
a
Check the MSHPF for proper installation, and then check its
paper path. See "Procedure before starting the MSHPF
service checks" on page
b
Enter the Diagnostics menu, select Output bin quick feed >
select bin, and then touch Single or Continuous.
Does the problem remain?
Step 2
Check door J1 for misalignment and damage.
Is the door properly installed and free of damage?
"Mid-transport diverter 2
"Mid-transport interface board
"MSHPF controller
937.
256.
Diagnostic information
Yes
Go to step 23.
Go to step 25.
Go to step 25.
Go to step 26.
Contact the next
level of support.
Yes
Go to step 2.
Go to step 4.
303
7564
No
The problem is
solved.
Go to step 24.
The problem is
solved.
The problem is
solved.
The problem is
solved.
No
The problem is
solved.
Go to step 3.