Lexmark CX825 Service Manual page 349

Action
Step 15
Check the compiler paddle and exit drive for damage.
•
Check the gears and paddles for contamination, wear, and
damage.
•
Reseat the cables.
•
Make sure that the cables are properly routed.
Is the paddle and exit drive free of damage?
Step 16
Reinstall or replace the paddle and exit drive. See
paddle and exit drive removal" on page
Does the problem remain?
Step 17
Check the compiler exit rollers for contamination, wear, and
damage.
Are the rollers free of damage?
Step 18
Check the rollers for misalignment.
Are the rollers properly installed?
Step 19
Reinstall or replace the roller. See
on page 1142.
Does the problem remain?
Step 20
Check the stapler bin lower exit belt for misalignment and damage.
Note: Make sure that there are no other parts interfering with the
movement of the belt.
Is the belt properly installed and free of damage?
Step 21
Reinstall or replace the belt. See
removal" on page 1144.
Does the problem remain?
Step 22
Check the stapler bin lower exit roller for contamination, wear, and
damage.
Is the roller free of damage?
"Compiler
1140.
"Compiler exit roller removal"
"Stapler bin lower exit roller belt
Diagnostic information
349
Yes No
Go to step 17. Go to step 16.
Go to step 17. The problem is
solved.
Go to step 18. Go to step 19.
Go to step 20. Go to step 19.
Go to step 20. The problem is
solved.
Go to step 22. Go to step 21.
Go to step 22. The problem is
solved.
Go to step 23. Go to step 24.
7564