Errors - Lexmark CX825 Service Manual

Action
Step 8
Reset the printer.
Does the problem remain?
Step 9
Replace the controller board. See
board removal" on page
Does the problem remain?
166–169 errors
166 error messages
Error code Description
166.70 The motor (tray 2 elevator) does not turn on.
166.71 The motor (tray 2 elevator) does not turn off.
166.72 The motor (tray 2 elevator) fails to achieve the
required speed.
166.73 The motor (tray 2 elevator) fails during operation.
166.74 The motor (tray 2 elevator) fails to reach the
required speed.
166.75 The motor (tray 2 elevator) runs faster than the
required speed.
166.80 The motor (tray 2 pass‑through) does not turn on. See
166.81 The motor (tray 2 pass‑through) does not turn off.
166.82 The motor (tray 2 pass‑through) fails to achieve
the required speed.
166.83 The motor (tray 2 pass‑through) fails during
operation.
166.84 The motor (tray 2 pass‑through) fails to reach the
required speed.
166.85 The motor (tray 2 pass‑through) runs faster than
the required speed.
"550-sheet tray controller
757.
Diagnostic information
Yes
Go to step 9.
Contact the next
level of support.
Action
See "Motor (tray [x] elevator) failure service
check" on page
"Motor (tray [x] pass‑through) failure
service check" on page
454
No
The problem is
solved.
The problem is
solved.
457.
456.
7564