Lexmark CX825 Service Manual page 368

Action
Step 7
a
Enter the Diagnostics menu, and then navigate to:
Output device diagnostics > Sensor tests > Finisher
b
Find the sensor (Standard bin lower limit).
Does the sensor status change while toggling the sensor?
Step 8
Reseat the sensor cable, and then check the sensor for
misalignment and damage.
Is the sensor properly installed and free of damage?
Step 9
Reinstall or replace the sensor.
Does the problem remain?
Step 10
a
Enter the Diagnostics menu, and then navigate to:
Output device diagnostics > Sensor tests > Finisher
b
Find the sensor (Standard bin stack upper limit 1).
Does the sensor status change while toggling the sensor?
Step 11
Reseat the sensor cable, and then check the sensor for
misalignment and damage.
Is the sensor properly installed and free of damage?
Step 12
Reinstall or replace the sensor. See
upper limit) removal" on page
Does the problem remain?
Step 13
a
Enter the Diagnostics menu, and then navigate to:
Output device diagnostics > Sensor tests > Finisher
b
Find the sensor (Standard bin paper present).
Does the sensor status change while toggling the sensor?
Step 14
Reseat the sensor cable, and then check the sensor and its
actuator for misalignment and damage.
Is the sensor properly installed and free of damage?
"Sensor (standard bin stack
1011.
Diagnostic information
368
Yes No
Go to step 10. Go to step 8.
Go to step 10. Go to step 9.
Go to step 10. The problem is
solved.
Go to step 13. Go to step 11.
Go to step 13. Go to step 12.
Go to step 13. The problem is
solved.
Go to step 16. Go to step 14.
Go to step 6. Go to step 15.
7564