Lexmark CX825 Service Manual page 385

Action
Step 23
Check the staging outer transport rollers for contamination, wear,
and damage.
Are the rollers free of damage?
Step 24
Check the rollers for misalignment.
Are the rollers properly installed?
Step 25
Check the staging inner transport rollers for contamination, wear,
and damage.
Are the rollers free of damage?
Step 26
Check the rollers for misalignment.
Are the rollers properly installed?
Step 27
Check the staging transport belts for misalignment and damage.
Note: Make sure that there are no other parts interfering with the
movement of the belts.
Are the belts properly installed and free of damage?
Step 28
Reinstall or replace the belt. See
removal" on page 990.
Does the problem remain?
Step 29
a
Enter the Diagnostics menu, and then navigate to:
Output device diagnostics > Motor tests > Finisher > Staging,
outer and inner transport
b
Touch Start.
Does the motor run?
Step 30
Reseat the motor cable, and then check the motor for misalignment
and damage.
Is the motor properly installed and free of damage?
"Staging transport belts
Diagnostic information
385
Yes No
Go to step 25. Go to step 24.
Go to step 25. The problem is
solved.
Go to step 27. Go to step 26.
Go to step 27. The problem is
solved.
Go to step 29. Go to step 28.
Go to step 29. The problem is
solved.
Go to step 32. Go to step 30.
Go to step 32. Go to step 31.
7564