Adf Media Exit Actuator Removal - Lexmark CX825 Service Manual

7
Remove the CCDM (ADF).
Note: When installing or replacing the CCDM (ADF), make sure to reconnect the ground wire, and then
perform test scans to ensure that image skew does not occur. If image skew occurs, then see
adjustment (back side)" on page

ADF media exit actuator removal

1
Remove the ADF rear cover. See
2
Remove the ADF front cover. See
3
Remove the ADF tray. See
4
Remove the CCDM (ADF). See
F
594.
"ADF rear cover removal" on page
"ADF front cover removal" on page
"ADF tray removal" on page
"CCDM (ADF) removal" on page
Repair information
730
E
711.
713.
713.
728.
7564
"ADF skew