Lexmark CX825 Service Manual page 516

Action
Step 27
Reinstall or replace the pulley gear.
Does the problem remain?
Step 28
Check the mid-transport interface board cables.
•
Reseat all connectors on the interface board.
•
Make sure that the cables are properly routed.
Does the problem remain?
Step 29
Replace the interface board. See
removal" on page 1005.
Does the problem remain?
Step 30
Check the interface board cables for cuts and damage.
Are the cables free of damage?
Step 31
Replace the cable.
Does the problem remain?
Step 32
Check the MSHPF standard bin assembly for misalignment and
damage.
Note: Check the cables for damage and make sure that they are
properly routed.
Is the bin assembly properly installed and free of damage?
Step 33
Reinstall or replace the bin assembly. See
assembly removal" on page
Does the problem remain?
Step 34
a
Reseat all connectors on the MSHPF controller board.
b
Make sure that the cables are properly routed, and then reset
the printer.
Does the problem remain?
"Mid-transport interface board
"MSHPF standard bin
1091.
Diagnostic information
516
Yes No
Go to step 28. The problem is
solved.
Go to step 29. The problem is
solved.
Go to step 30. The problem is
solved.
Go to step 32. Go to step 31.
Go to step 32. The problem is
solved.
Go to step 34. Go to step 33.
Go to step 34. The problem is
solved.
Go to step 35. The problem is
solved.
7564