Lexmark CX825 Service Manual page 322

Action
Step 7
a
Enter the Diagnostics menu, and then navigate to:
Output device diagnostics > Motor tests > Finisher > Staging,
outer and inner transport
b
Touch Start.
Does the motor run?
Step 8
Reseat the motor cable, and then check the motor for misalignment
and damage.
Is the motor properly installed and free of damage?
Step 9
Reinstall or replace the motor. See
transport) removal" on page
Does the problem remain?
Step 10
Check the staging transport gears for misalignment and damage.
Are the gears properly installed and free of damage?
Step 11
Reinstall or replace the gear. See
removal" on page 986.
Does the problem remain?
Step 12
Check the pulley gears for misalignment and damage.
Are the pulley gears properly installed and free of damage?
Step 13
Reinstall or replace the pulley gear.
Does the problem remain?
Step 14
Check the staging diverter and its fingers and spring for
misalignment and damage.
Is the diverter properly installed and free of damage?
"Motor (staging inner
982.
"Staging transport gears
Diagnostic information
322
Yes No
Go to step 10. Go to step 8.
Go to step 10. Go to step 9.
Go to step 10. The problem is
solved.
Go to step 12. Go to step 11.
Go to step 12. The problem is
solved.
Go to step 14. Go to step 13.
Go to step 14. The problem is
solved.
Go to step 15. Go to step 16.
7564