Advertisement

Quick Links

Quick Reference
Copying
Making copies
1
Load an original document into the ADF tray or on the scanner
glass.
Note: To avoid a cropped image, make sure that the original
document and output have the same paper size.
2
From the home screen, touch Copy, and then specify the
number of copies.
If necessary, adjust the copy settings.
3
Copy the document.
Note: To make a quick copy, from the control panel, press
Copying on both sides of the paper
1
Load an original document into the ADF tray or on the scanner
glass.
2
From the home screen, touch Copy > Paper Setup.
3
Adjust the settings.
4
Copy the document.
Copying multiple pages onto a single
sheet
1
Load an original document into the ADF tray or on the scanner
glass.
2
From the home screen, touch Copy > Pages per Side.
3
Adjust the settings.
4
Copy the document.
Faxing
Sending a fax
Using the control panel
1
Load the original document into the ADF tray or on the scanner
glass.
2
From the home screen, touch Fax, and then enter the needed
information.
3
If necessary, configure other fax settings.
4
Send the fax job.
Using the computer
Note: Make sure that the Universal Fax driver is installed.
For Windows users
1
.
With a document open, click File > Print.
2
Select the printer, and then click Properties, Preferences,
Options, or Setup.
3
Click Fax > Enable fax, and then enter the recipient number.
4
If necessary, configure other fax settings.
5
Send the fax job.
For Macintosh users
1
With a document open, choose File > Print.
2
Select the printer and enter the recipient number.
3
If necessary, configure other fax settings.
4
Send the fax job.
1
E-mailing
Sending an e-mail
Using the control panel
1
Load an original document into the ADF tray or on the scanner
glass.
2
From the home screen, touch E-mail, and then enter the
needed information.
Note: You can also enter the recipient using the address
book or shortcut number.
3
If necessary, configure the output file type settings.
4
Send the e-mail.
Using the shortcut number
1
From the control panel, press #, and then enter the shortcut
number using the keypad.
Send the e ‑ mail.
2
Printing
Printing from a computer
Note: For labels, card stock, and envelopes, set the paper size
and type in the printer before printing the document.
1
From the document that you are trying to print, open the Print
dialog.
2
If necessary, adjust the settings.
3
Print the document.
Printing confidential and other held
jobs
For Windows users
1
With a document open, click File > Print.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CX82 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Lexmark CX82 Series

  • Page 1 Faxing E-mailing Quick Reference Sending a fax Sending an e-mail Copying Using the control panel Using the control panel Load an original document into the ADF tray or on the scanner Load the original document into the ADF tray or on the scanner Making copies glass.
  • Page 2: Canceling A Print Job

    Note: Use the indicators on the bottom of the tray to position Click Properties, Preferences, Options, or Setup. Select the job to cancel. the guides. Click Print and Hold. From the computer Select Use Print and Hold, and then assign a user name. Depending on the operating system, do either of the following: Select the print job type (Confidential, Repeat, Reserve, or •...
  • Page 3: Loading The Multipurpose Feeder

    • Adjust the guide to match the size of the paper you are loading. Load envelopes with the flap side up and against the left side of the paper guide. Load European envelopes with the flap side up and entering the printer first. Warning—Potential Damage: Do not use envelopes with stamps, clasps, snaps, windows, coated linings, or self ‑...
  • Page 4: Maintaining The Printer

    • Insert the new toner cartridge until it into place. ADF glass Maintaining the printer Replacing a toner cartridge Open door A. Close door A. Cleaning the scanner • ADF glass pad Open the scanner cover. Remove the toner cartridge. •...
  • Page 5: Identifying Jam Locations

    • • Scanner glass pad Do not slide paper into the tray. Load paper as shown in the Identifying jam locations illustration. Notes: • When Jam Assist is set to On, the printer flushes blank pages or pages with partial prints after a jammed page has been cleared.
  • Page 6: Paper Jam In Trays

    Finisher jam locations Insert the tray. Open the tray cover. Door L Close the tray cover. Door J Paper jam in the multipurpose feeder Door K Door N Remove paper from the multipurpose feeder. Remove the jammed paper. Paper jam in trays Note: Make sure that all paper fragments are removed.
  • Page 7: Paper Jam In The Automatic Document Feeder

    Open door D. Close door B. Flex, fan, and align the paper edges before loading. Close door D. Open the scanner cover. Reload paper. Remove the jammed paper. Note: Make sure that all paper fragments are removed. Paper jam in the automatic document Warning—Potential Damage: Some parts of the printer are feeder easily damaged by static electricity.
  • Page 8: Paper Jam In The Standard Bin

    CAUTION—HOT SURFACE: The inside of the printer Open door E. Paper jam in the standard bin might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching Remove the jammed paper. Note: Make sure that all paper fragments are removed.
  • Page 9 Open the fuser access door. Paper jam in the duplex unit Open door B. CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching Open the duplex cover.
  • Page 10 Open door C. Open door F. Close the duplex cover and door B. Paper jam in the finisher bin Close doors F and C. Remove the jammed paper. CAUTION—PINCH HAZARD: To avoid the risk of a pinch injury, keep hands clear of the labeled area when Note: Make sure that all paper fragments are removed.
  • Page 11 Note: Do not insert the staples that came out of the Open door G. Pull out the staple cartridge holder. cartridge. Close the staple guard. Insert the staple cartridge holder. Lift the staple guard, and then remove the loose staples. Close doors G and C.
  • Page 12 • Note: Make sure that all paper fragments are removed. Paper jam in door K Using knob J2 • Area J1 Open doors C and K. Remove the jammed paper. Note: Make sure that all paper fragments are removed. • Using knob K1 •...
  • Page 13 Paper jam in door N Paper jam in door L Paper jam in the staple finisher bin Open door N. Open door L. Open door J. Remove the jammed paper. Remove the jammed paper. Note: Make sure that all paper fragments are removed. Note: Make sure that all paper fragments are removed.
  • Page 14 Staple jam in door J Open the staple guard, and then remove the loose staples. Insert the staple cartridge holder. Open door J. Close door J. Remove the staple cartridge holder. Note: Do not insert the staples that came out of the cartridge.

Table of Contents