NEC Electra Elite IPK Programming Manual page 685

Document Revision 4
___________________________________________________________________________________
E
Programming Procedures
7 Press to go back on-line.
Related Programming
M.B. Number Memory Block Name
1-1-46 Access Code (1-Digit) Assignment
3-03 Trunk-to-Trunk Group Assignment
1. This Memory Block applies only when two or more systems are connected by Tie lines or when the systems are
connected by a DID line.
2. When the call is intended for another system, the Tie line is directed to send the number again.
3. At default, DID lines are not assigned to a Trunk group.
4. This Memory Block affects T1 channels assigned as Tie/DID lines.
___________________________________________________________________________________
2 - 608
Notes
Electra Elite IPK
Memory Blocks