Class Of Service (Station) Feature Selection 2 - NEC Electra Elite IPK Programming Manual

Document Revision 4
___________________________________________________________________________________
Programming Procedures
1 Go off-line.
K G
2 Press LK1 + LK8 +
3 Press the corresponding CO/PBX line key to enter data.
The LED indication changes to indicate the data each time a CO/PBX line key is pressed.
CO/PBX
Line Key LED
Data
C
Use the following when entering data:
A
Press
Press
G
4 Press key. Data for Class 01
G
5 Press to write the data for Class 15. The next Memory Block is displayed.
6 Program the next Memory Block or press
Related Programming
M.B. Number Memory Block Name
1-8-08

Class of Service (Station) Feature Selection 2

4-17 Station to Class of Service Feature Assignment
1. System-Wide Reset selection resets the following: Call Forward
and Callback Request.
2. Password (Outgoing Restriction) selection cancels Station Lockout and default password for another station.
3. Sixteen Classes (00
restricting others.
4. At default, stations 100 and 101 are in class 00. All other stations are in class 15.
5. Stations are assigned to a Class of Service in Memory Block 4-17 (Station to Class of Service Feature
Assignment).
___________________________________________________________________________________
2 - 212
to access the Memory Block.
Off On
Deny Allow
to go to the next page.
to go to the previous page.
15 is displayed successively.
~
E
to go back on-line.
15) of feature restriction patterns allow a station user to activate particular features while
~
The shaded area indicates
the default setting.
Notes
All Call, Do Not Disturb, Customized Message,
–
Electra Elite IPK
Memory Blocks