NEC Electra Elite IPK Programming Manual page 432

Electra Elite IPK
___________________________________________________________________________________
Related Programming (Continued)
M.B. Number Memory Block Name
1-15-07 K-CCIS Message Response Timeout Assignment
1-15-08 Link Reconnect Allow/Deny Selection
1-15-09 K-CCIS Maximum Call Forwarding Hop Assignment
1-15-11 Centralized Billing Allow/Deny Selection
1-15-12 Centralized Billing – Point Code of Center Office Assignment
1-15-13 Centralized Day/Night Switching for Remote Office Assignment
1-15-14 Centralized Day/Night Switching for Main Office Assignment
1-15-15 Centralized BLF Send Point Code Assignment
1-15-16 Centralized BLF Send Extension Number Assignment
1-15-17 Centralized BLF Send Time Assignment
1-15-18 Centralized BLF Display Extension Number Assignment
3-70 CIC Number Assignment
5-05 Common Signaling Channel Route Selection
1-1-05 Start Time Selection
1-5-02 SMDR Print Format
1-5-13 Printer Connected Selection
1-5-14 Printer Line Feed Control Selection
1-5-25 SMDR Valid Call Time Assignment
1-5-26 SMDR Incoming/Outgoing Print Selection
1-8-35 COM Port Baud Rate Setting Assignment
4-56 SMDR Telephone Print Selection
1. This Memory Block determines whether or not the station name is sent to the distant system.
2. This Memory Block is not used with and has no effect on the IP (K-CCIS) feature.
___________________________________________________________________________________
Programming Manual
Notes
Document Revision 4
2 - 355