System Programming Modes; Table 1-1 Programming Modes - NEC Electra Elite IPK Programming Manual

Electra Elite IPK
___________________________________________________________________________________
2.2
___________________________________________________________________________________
Programming Manual
Two Multiline Terminals, connected to ports 01 and 02, respectively, can
be used simultaneously for programming.

System Programming Modes

Modes and submodes are listed in
Line
Mode Name
Key
LK 1 System Mode
LK 2 Tenant Mode
LK 3 CO/PBX Line Mode
LK 4 Telephone Mode
LK 5 Trunk Group Mode
LK 6 Copy Mode
LK 7 ETU Mode
Table 1-1 Programming

Table 1-1 Programming Modes

Line
Key
LK 1 CO Line
LK 2 ICM
LK 3 SLT
LK 4 Transfer/Automated Attendant
LK 5 SMDR/LCR
LK 6 DSS
LK 7 ESP
LK 8 PBR/Miscellaneous
LK 9 DISA
LK 10 Call by Call
LK 11 DTI
LK 12 ACD/UCD
LK 13 PRI
LK 14 ARS
LK 15 K-CCIS
LK 16 HUB
N/A N/A
N/A N/A
N/A N/A
N/A N/A
LK 2 Tenant Mode Copy Assignment
LK 3 CO Line Mode Copy Assignment
LK 4 Telephone Mode Copy Assignment
LK 5 Trunk Group Mode Copy Assignment
LK 1 Card Interface Slot Assignment
LK 2 Telephone Type Assignment
LK 3 MIF Assignment
LK 4 MIF (Caller ID) Assignment
Document Revision 4
Modes.
Submode Name
1 - 3