Clock/Calendar Setting - NEC Electra Elite IPK Programming Manual

Document Revision 4
___________________________________________________________________________________

Clock/Calendar Setting

General Description
This Memory Block is used to set the time and date displayed on the Multiline
Terminals. Clock/Calendar must be set on a port 01 or port 02 assigned terminal.
Display
T I M E
A
Programming Procedures
1 Press .
I
.
2 Dial
L
3 Dial .
C
4 Dial current time (e.g.
H
5 Press to toggle AM/PM.
C
6 Press to advance to the calendar.
7 Press to select the day of the week.
L
8 Dial to move the cursor to the day of the month setting.
C
9 Enter the date using the dial pad (
10 Press to select the month.
L
11 Dial to move the cursor to the year setting.
A
12 Enter the last two digits of the year using the dial pad (
13 Press .
1. This operation must be performed at port 01, or port 02 only.
2. The Clock/Calendar cannot be set using PC Programming.
3. To set the time only, press
___________________________________________________________________________________
2 - 646
1 1 : 0 8 A M
D I S P L A Y
K C : B I
) .
K I
~ ) .
A
after Step 5
K I
~ ) .
Notes
.
Electra Elite IPK
System Mode
—
Submode
—
Data No.
—
PC Programming
Memory Blocks