Page 1
Notice Note that when converting this document from its original format to a .pdf file, some minor font and format changes may occur causing slight variations from the original printed document. When viewing and printing this document, we cannot guarantee that your specific PC or printer will support all of the fonts or graphics. Therefore, when you view the document, fonts may be substituted and your individual printer may not have the capability to print the document correctly.
Table of Contents General Information ..............1 Quick Reference Guide ..............1 Answering Calls ................2 Ringing Calls ....................2 Call Alert Notification .................. 2 Placing Calls ................. 3 Internal Calls ....................3 Outside Calls ....................3 Last Co/PBX Number Redial ..............3 Station/System Speed Dial .................
Page 4
Call Park ..................6 Retrieving A Parked Call ................6 Tone Override ................6 Voice Over ..................7 Call Forwarding ................7 From Your Station ..................7 Call Forward All Split/Centrex From Your Station ........8 Call Forward Busy/no Answer (CFW B/NA) From Your Station ....8 Call Forward Busy/No Answer or All Split/Centrex From a Destination ..9 Paging ...................
ENERAL NFORMATION The following should be considered when reviewing this User Guide: Access to many features is based on system assignments. Some access codes may vary from those stated in this user guide and not all features may be available from your telephone. The Flash or Tap key located on certain models of Single Line Telephones can be used in place of the hookswitch.
External Paging Dial 55~59 Page Call Pickup Dial 68 for All Calls for CO/PBX Calls Call Pickup Direct Dial 67 Dial Station Number Call Forward Set: Dial 41 for Forward All Dial Destination 43 for Busy/No Answer Cancel: Dial 42 for Forward All 44 for Forward Busy/No Answer Programming Speed Dial Dial 76...
LACING ALLS NTERNAL ALLS Lift handset. Dial station number or 0 for the attendant. Note:1 When calling a multiline telephone, dialing 1 after the station number will change ringing to voice or voice to ringing. Note:2 To directly access a personal voice mailbox, dial 7 after dialing the station number.
RUNK UEUING Upon receiving busy tone when all outside lines are busy: Dial Trunk Queue set code 78. Replace handset. Note: When an outside line is available, your telephone will ring; lift handset and place call (no need to dial Trunk Access code). OLDING ALLS XCLUSIVE...
ONFERENCE With an internal call in progress: Press Hookswitch. Place second call (internal or outside). Announce conference. Press Hookswitch to establish conference. Note:1 Repeat above procedure to add a fourth party. Note:2 No more than 1 outside party can participate in a conference. Note:3 A conference may be placed on Hold by pressing Hookswitch.
Start a conference call from an incoming CO call using an Attendant: Call the attendant, and ask to be transferred to a Conference Bridge extension. Wait until the transfer is complete. When the voice prompt is heard, enter the password and press #. Start the conference call.
OICE Originate/Answer Originate Answer When calling a busy telephone: With a call in progress: Dial Voice Over code 6. Receive Voice Over announcement. Announce message. Replace handset; first call is terminated. Lift handset when phone rings. Converse with Voice Over originator. ORWARDING TATION Set/Cancel:...
ORWARD NSWER OR PLIT ENTREX ROM A ESTINATION Set/Cancel: Cancel Lift handset. Lift handset. Dial Call Forward - Busy/No Dial Call Forward - Busy/No Answer or All Split set code: Answer or All Split cancel ______ . code: ______ . Dial 1 for internal, 0 or external Dial 1 for internal, 0 or external or or 2 for Centrex.