1-11-01 Clear Channel Selection - NEC Electra Elite IPK Programming Manual

Document Revision 4
___________________________________________________________________________________

1-11-01 Clear Channel Selection

General Description
Use this Memory Block to specify the clear channel selection. when the Zero Byte
Time channel is available, the CLKG-U( ) Unit cannot extract a clock signal from the
T1 trunk. The T1 trunk modifies the Zero Byte Time channel to extract a clock signal
for the CLKG-U( ) Unit.
Display
D T I N o .
D a t a
( 0 1 ~ 0 8 )
N o .
0 1 / 0 1 : O B Y T E = Z C S
T I M E
Settings
LK 1 LK 2
ZCS B8ZS
Programming Procedures
1 Go off-line.
K A
2 Press LK1 + LK11 +
3 Press the corresponding CO/PBX line key to change the data option.
G
4 Press to write the data. The next Memory Block is displayed.
5 Program the next Memory Block or press
Related Programming
M.B. Number Memory Block Name
7-1 Card Interface Slot Assignment
The DTI-U( ) ETU must be assigned in the system to set this Memory Block.
___________________________________________________________________________________
2 - 290
S e t t i n g
D a t a
T i t l e
D I S P L A Y
LK 3 LK 4 LK 5
to access the Memory Block.
E
to go back on-line.
LK 6 LK 7
Notes
Electra Elite IPK
System Mode
1
Submode
11
Data No.
01
PC Programming
+AD
LK 8 The shaded
selection is the
default.
Memory Blocks