NEC Electra Elite IPK Programming Manual page 54

Electra Elite IPK
___________________________________________________________________________________
LK 1 System Mode
LK 4 Transfer/Automated Attendant (A.A.) (Continued)
Data
Memory Block Name
No.
11 Automated Attendant Message
Day/Night Mode Selection
12 Automated Attendant Message to
Tenant Assignment
13 Automated Attendant Answer Delay
Time Assignment
14 Automated Attendant Message
Access Code (1-Digit) Assignment
15 Automated Attendant Message
Access Code (2-Digit) Assignment
16 Automated Attendant Message
Repeat Selection
17 Automated Attendant Delay
Announcement Hold Tone
Selection
18 Automated Attendant Delay
Announcement Assignment
19
Automated Attendant 1
Delay Announcement Interval Time
Selection
20 Automated Attendant Delay
Announcement Disconnect Time
Selection
21 Automated Attendant Extension
Number Assignment
22 Automated Attendant Direct
Extension Ring Assignment
___________________________________________________________________________________
Programming Manual
Default Value
NO
00
04s
Refer to
(1-Digit) Assignment on page
Refer to
(1-Digit) Assignment on page
1
All messages
RBT
NONE (Not specified)
st nd 4m
to 2
30s
Not Specified
Not Specified
YS, NO
Tenant Number 00 to 47
00~99s, per MSG 1~8
1-4-14 Automated Attendant Message Access Code
2-166.
1-4-14 Automated Attendant Message Access Code
2-166.
1, 2, 3, 4, 5, 6, 7, 8
RBT, MOH
None, MSG1, MSG2, MSG3, MSG4,
MSG5, MSG6, MSG7, MSG8
0s, 10s, 20s, 30s, 1m, 2m, 3m, 4m,
5m,
10m, 20m.
0s, 10s, 20s, 30s, 1m, 2m, 3m, 4m,
5m, 10m, 20m
2-digit (10~89), 3-digit (100~899), or
4-digit (1000~8999) extension
numbers
Messages 1~8
2-digit (10~89), 3-digit (100~899), or
4-digit (1000~8999) extension
numbers
Messages 1~8
Document Revision 4
Programming Values
1 - 21