Operator Call Time Out Table Example - NEC Electra Elite IPK Programming Manual

Electra Elite IPK
___________________________________________________________________________________
___________________________________________________________________________________
Programming Manual
Trunk Group or Route Advance Blocks are specified in TG/
RAB.
Delete digits specifies the number of digits to delete from the
first dial when using PRT.
PreDigits controls whether digits that are specified in pre-digit
tables are dialed before the International or Operator code.
When TG/RAB is not assigned, outgoing calls cannot be made.
When an unassigned OCC number is dialed, route selection is
bypassed.
Tables (64)
01~16 for
each Class
Table 1
3.4.3

Operator Call Time Out Table Example

This table specifies a timeout (0~9 seconds) that is used to
distinguish between 0 and 00 of an Operator Call.
OCC Table Example
OCC Dial Dial Priority TG/RAB
0-
00
011
XXX
101
0N
X
(X = 0~9)
0288
101
1N
(N = 2~9)
NX
(X = 0~9)
#
Document Revision 4
Delete
Digits
RAB 15 8
1
2 None
1 RAB 16 9
2 None
1 RAB 3 10
2 None
1 RAB 4 10
2 None
1 RAB 5 10
2 None
1 RAB 6 9
2 None
1 RAB 7 8
2 None
PreDigits
Add/Not
Add
Not Add
Not Add
Not Add
Not Add
Not Add
Not Add
Not Add
Not Add
Not Add
Not Add
Not Add
Not Add
Not Add
Not Add
3 - 41