Lcr Class Selection - NEC Electra Elite IPK Programming Manual

Electra Elite IPK
___________________________________________________________________________________
4-40

LCR Class Selection

General Description
Use this Memory Block to specify per station the Least Cost Routing (LCR) Class. The
Electra Elite IPK system has four Area Code Tables. Each LCR Class can have
different Trunk group access to allow priority levels for the station user. This Memory
Block can be used to specify either the LCR Class or the Automatic Route Selection
(ARS) Class (Tables 1~4) depending on the system configuration.
Display
T e l
P o r t
D a t a
N o .
~
N o .
( 0 1 C 0 )
0 1 / 4 0 : L C R
T I M E
Settings
LK 1 LK 2
0 1
Programming Procedures
1 Go off-line.
D K
2 Press LK4 +
3 Press line key to specify LCR Class for Tel Port No.
Use the following to enter data:
J
t o move the cursor left
L
t o move the cursor right
K I
~ t o enter numeric data or Tel Port No.
D
– OR –
B
to go to next assigned Tel Port No.
B
A
+
B B
+
C
G
+
4 Press to write the data and display the next Memory Block.
5 Program the next Memory Block or press
___________________________________________________________________________________
Programming Manual
S e t t i n g
T i t l e D a t a
C L S = 0
D I S P L A Y
LK 3 LK 4
2 3
to access the Memory Block.
t o enter A for Port Numbers 100~109
t o enter B for Port Numbers 110~119
t o enter C for Port Number 120
E
LK 5 LK 6
4
to go back on-line.
Document Revision 4
Telephone Mode
PC Programming
LK 7 LK 8 The shaded
selection is the
default.
Numbers are
LCR Classes.
4
Submode
—
Data No.
40
+BTT
2 - 551