Call By Call (Cbc) Programming (Lcr Pc Software V2.0 Or Higher); The International/Operator Table; The Occ Table - NEC Electra Elite IPK Programming Manual

Document Revision 4
___________________________________________________________________________________
3.4
___________________________________________________________________________________
3 - 40

Call by Call (CBC) Programming (LCR PC Software V2.0 or Higher)

3.4.1

The International/Operator Table

This table has a page for each LCR Class (1~4) that contains fixed
dialing patterns that can be assigned to that Class.
Two routes can be assigned and arranged in priority. PRT
should have higher priority.
Trunk Group or Route Advance Blocks are specified in
TG/RAB.
Delete digits specifies the number of digits to delete from the
first dial when using PRT.
PreDigits controls whether digits that are specified in pre-digit
tables are dialed before the International or Operator code.
When TG/RAB is not assigned, outgoing calls cannot be made.
LCR Class
1~4
Class1
3.4.2

The OCC Table

This Table has 16 pages (called Table 1~Table 16) that are required
for each of the LCR Classes for a total of 64 tables with fixed dialing
patterns.
Dial means following the OCC dial.
Two routes can be assigned and arranged in priority. PRT
should have higher priority.
International or Operator Table Example
Dial Priority TG/RAB
1 RAB 09
0-
2 None
1 RAB 10
00
2 None
1 RAB 11
010
2 None
1 RAB 12
011
2 None
1 RAB 13
01N
2 None
1 RAB 14
ON
(N = 2~9) 2 None
Electra Elite IPK
Delete PreDigits
Digits Add/Not Add
1 Not Add
None Not Add
2 Not Add
None Not Add
3 Not Add
None Not Add
3 Not Add
None Not Add
2 Not Add
None Not Add
1 Not Add
None Not Add
Advanced Applications