Calling Name Display Allow/Deny Selection; Centralized Billing Allow/Deny Selection; Centralized Billing - Point Code Of Center Office Assignment; Centralized Day/Night Switching For Remote Office Assignment - NEC Electra Elite IPK Programming Manual

Electra Elite IPK
___________________________________________________________________________________
Related Programming (Continued)
M.B. Number Memory Block Name
1-15-10

Calling Name Display Allow/Deny Selection

1-15-11

Centralized Billing Allow/Deny Selection

1-15-12 Centralized Billing – Point Code of Center Office Assignment
1-15-13

Centralized Day/Night Switching for Remote Office Assignment

1-15-14

Centralized Day/Night Switching for Main Office Assignment

1-15-15

Centralized BLF Send Point Code Assignment

1-15-16

Centralized BLF Send Extension Number Assignment

1-15-17

Centralized BLF Send Time Assignment

1-15-18 Centralized BLF Display Extension Number Assignment
3-70 CIC Number Assignment
5-05 Common Signaling Channel Route Selection
1-1-05 Start Time Selection
1-5-02 SMDR Print Format
1-5-13 Printer Connected Selection
1-5-14 Printer Line Feed Control Selection
1-5-25 SMDR Valid Call Time Assignment
1-5-26 SMDR Incoming/Outgoing Print Selection
1-8-35 COM Port Baud Rate Setting Assignment
4-56 SMDR Telephone Print Selection
1. When NO is selected, Link Reconnect does not take place.
2. When Local Loop/Ground Start Trunks are used, and a disconnect signal is not received from the network, the
time set in Memory Block 1-1-05 (Start Time Selection) applies for the reconnect to take place.
___________________________________________________________________________________
Programming Manual
Notes
Document Revision 4
2 - 351