NEC Electra Elite IPK Programming Manual page 463

Document Revision 4
___________________________________________________________________________________
Related Programming
M.B. Number Memory Block Name
7-1 Card Interface Slot Selection
1-16-00 Auto Negotiation Yes/No Selection
1-16-01 Port Speed Selection – 10/100 Base T
1-16-02 Port Duplex Mode Selection
1-16-04
VLAN Mode Selection
1-16-05
Default VLAN ID Tag Insertion Assignment
1-16-06
Port Based Priority Selection
1-16-07
High Priority RX Tag Threshold
1-16-08 High Priority TX Tag Assignment
1-16-09 Low Priority TX Tag Assignment
1-16-10 Port Mirroring Selection
1-16-11 Mirroring Source Port Assignment
1-16-12 Mirroring Target Port Assignment
1-16-13 VLAN Group to VLAN ID Assignment
1-16-14
Port VLAN Group Membership
1-16-15
VLAN Tag Insertion Selection
1-16-16
Flow Control for Full Duplex Selection
1-16-17
Back Pressure for Half Duplex Selection
1. Only one HUB(8)-U( ) ETU can be assigned and installed for each cabinet.
2. MDI/MDIX is an Ethernet port connection using twisted-pair cable. Medium Dependent Interface (MDI) is the
Media Attachment Unit (MAU) component that provides the physical and electrical connection to the cabling
medium. An MDIX (MDI crossover) is an MDI version that enables cabling between like devices. MDI ports
connect to MDIX ports using straight-through twisted-pair cabling; both MDI-to-MDI and MDIX to-MDIX
connections use crossover twisted-pair cabling.
___________________________________________________________________________________
2 - 386
Notes
Electra Elite IPK
Memory Blocks